|
Model Number: WMP-L02S4P |
| Item |
Specification |
Remark |
| Nominal capacity |
5200mAh |
Sanyo cell
UR18650A |
| Nominal voltage |
7.4v |
3.7v / cell |
| Charging voltage |
8.4v±0.5v |
4.2v / cell |
| Charging method |
CC / CV |
Constant current
and voltage with limited current |
| Standard charging
time |
2000mA/6hrs,
3000mA/4hrs |
Battery capacity /
charging current x 1.5 |
| Charging current |
5200mA(0.5C) |
0 ~ +40℃ |
| Max charging
current |
10400mA(1C) |
0 ~ +40℃ |
| Continuous
discharging current |
10400mA(1C) |
-20 ~ +60℃ |
| Discharge cutoff
voltage |
4.8v |
2.4v / cell |
| Short circuit
protection |
Exterior short
circuit |
Auto recovery |
| Internal
resistance |
≤200mΩ |
AC impedance 1kHz |
| Cycle life |
≥500 |
|
|
Operating temperature |
Standard charge |
℃0 ~ +40℃ |
| Standard discharge |
-20 ~ +60℃ |
| Dimension size |
L80 x W54 x T68
(mm) |
Length x Wide x
Thickness |
| Pre - wired |
Red =
Positive, Black = Negative |
|
Protection Circuit Module : WMB-L02S10-014 |
| Max continuous
charging current |
10A |
| Max continuous
discharging current |
10A |
| Over-charge
detection voltage |
4.35v
± 0.025v |
Single cell |
| Over-charge
release voltage |
4.05v
± 0.05v |
Single cell |
| Over-charger
detection delay time |
0.7s ~1.3s |
Single cell |
| Over-discharge
detection voltage |
2.3v
± 0.062v |
Single cell |
| Over-discharge
release voltage |
3.0v
± 0.01v |
Single cell |
| Over-discharge
release delay time |
89 ~167mS |
Single cell |
| Over-current
detection |
25A
± 3A |
Adjustable |
| Over-current delay
time |
6.7 ~
13.9mS |
(ID13632959016)
